tel: 310-325-1043 fax: 310-325-1044 www.mpsind.com sales@mpsind.com P6201 series ? designed for use with the maxim? max253, max845 and ana - log devices? adm2485 or equivalent to provide isolated rs-485, rs-232, and rs-422 interfaces. ? high isolation voltage of 2.5kvrms ? small size: 15.00mm x 10.40mm x 6.50mm ? operating temperature: -40c to +85c ? rohs compliant product ? custom design available electrical parameters @25c part number P6201- inductance (1-4) (h typ) turns ratio (1-4 : 8-5) (5%) et (1-4) v-sec (max) dcr (1-4) ( max) l l (1-4) (h max) cww (1-4 to 8-5) (pf max) 21 500 2ct : 1 ct 18 1.50 1.50 50 83 500 2.67ct : 1ct 18 1.50 2.00 50 43 500 1.33ct : 1ct 11 1.00 1.20 50 34 500 1ct : 1.33ct 11 1.00 1.20 50 11 500 1ct : 1ct 11 1.00 1.00 50 13 500 1ct : 2ct 11 1.00 1.20 50 38 500 1ct : 2.67ct 11 1.00 2.00 50 122 250 1ct : 2.2ct 11 1.00 1.00 50 23 500 1ct : 1.5ct 18 1.00 1.00 50 notes: ? primary: connect 1-2 and 3-4 in series ? secondary: connect 8-7and 6-5 in series ? ocl, l l , cww measured at 100khz, 0.1vrms ? hipot: 2500vrms, 1ma, 2s, primary to secondary product performance is limited to specifed parameters. data is subject to change without prior notice. rs-485/rs-422 interface push-pull transformers dimensions schematic dimensions unless otherwise specifed, all tolerances are: inch: .xx : 0.015 .xxx : 0.004 mm: x,x : 0,38 x,xx : 0,10
|
